| MOCLAMP |
| Mo-Grip Jaw Surface |
Now available on Flash Clamp Family #0450, 0451,0452. Coming soon to other tools.
This is quite possibly the biggest turn of events for gripping various hard to hold surfaces on today's vehicles.
The new super steels that contain such alloys as Boron and other slick, hard surfaces make conventional gripping a real challenge for the tools and wear factor on jaws is quite significant.
Being dedicated to helping the technician complete his job, we took the challenge presented by the new products as an opportunity to upgrade our efforts and products to meet Boron Steel head on. |  |
|
| 7400 Mo-Pro Gauge Package |
This package includes #7001 Universal Tram Gauge, #7200 Deluxe Centerline Gauge, #7300 Strut Tower Alignment Gauge, display board and hooks.
Be sure to use your unibody and chassis dimension and specification charts. |  |
| Weight: |
96 lbs (43.54kg) |
| Replacement Parts: |
#710120 Board Only, #710126 Hook Set Only.
Made in the U.S.A. |
|
| 7000 Universal Tram Gauge w/storage case |
Tram Instruments are a versatile and indispensable tool for determining collision damage to unibody cars and for checking critical measurements during repair. Use the tram to check dimensions between control points on suspension and mechanical components.
The Tram Instrument makes it easy to establish dimensions around components and to check contours by comparing measurements from one side of the vehicle to the other.
Measures from 21/2" (65mm) to 11' (3.3m). Level bubble installed in sliding head for accuracy in measurement. Includes hard plastic storage case. |  |
| Weight: |
13 lbs (5.90kg) |
|
Made in the U.S.A. |
|
| 0300 JR™ Clamp |
| One of Mo-Clamp's original self-tightening clamps. A must for every body man. 1½" wide bite for aggressive pulling. Original wedge. New angled tooth design. |  |
| Gripping Surface: |
1½" wide (38 mm)
¾" deep (19 mm) |
| Capacity: |
5 tons (4,536 kg) |
| Overall Length: |
9" (229 mm) |
| Weight: |
5 lbs (2.27 kg) |
| Replacement Parts: |
#5350 Nut & Bolt, #9701 Wedge, #840087 Spring
Heat Treated Steel.
Made in the U.S.A. |
|
| 0305 Dyna-Mo™ JR Clamp |
| New generation of Mo-Clamps. Self-tightening. Thin-edged nose for getting into hard-to-reach places. Drop-forged round wedge to keep twist out of chain, aggressive cross-hatch tooth design, spring loaded for easy opening. |  |
| Gripping Surface: |
1¼" wide (32 mm)
1" deep (25 mm) |
| Capacity: |
3 tons (2,722 kg) |
| Overall Length: |
7" (178 mm) |
| Weight: |
2 lbs (.91 kg) |
| Replacement Parts: |
#5247 Nut, Bolt, Spring & Washer, #9702 Wedge
Heat Treated Steel.
Made in the U.S.A. |
|
| 0307 Dyna-Mo™ Corner Clamp |
| With 3 tons
of capacity, the Corner Clamp conforms to the exacting
standards of all Mo-Clamp products. Made from Mo-Clamp
Tru-Tuff™ heat-treated steel alloy, the 90-degree
Corner Clamp uses a drop forged wedge for added
strength. Eliminates the need to use two separate
clamps and will be able to get into narrow and confined
areas. |
 |
Capacity: |
3 tons (2,722 kg) |
| Overall Length: |
7" (178 mm) |
| Weight: |
2.14 lbs (.97 kg) |
| Throat Depth: |
1" (25.5 mm) |
| Replacement Parts: |
#5257 Nut,
Bolt, Spring & Washer, #9702 Wedge
Heat Treated Steel.
Made in the U.S.A. |
|
| 0400 W® Clamp |
| Self-Tightening.
The Super Clamp for the tough jobs. Ultra-wide gripping
surface. Grabs 4¼" of metal. Original
wedge. Original straight cut tooth design. |
 |
| Gripping Surface: |
4¼" wide (108 mm)
1" deep (25 mm) |
| Capacity: |
6 tons (5,443 kg) |
| Overall Length: |
9½" (241 mm) |
| Weight: |
11 lbs (4.99 kg)
|
| Replacement Parts: |
#5120 Nut
& Bolt, #9801 Wedge
Heat Treated Steel.
Made in the U.S.A. |
|
| 0405 Dyna-Mo™ W Clamp |
| New generation
of Mo-Clamps. Self-Tightening. Wider tooth surface
to grab more thin metal without tearing. Drop-forged
round wedge to keep twist out of chain and aggressive
cross-hatch tooth design. |
 |
| Gripping Surface: |
2¼" wide (57 mm)
1¾" deep (45 mm) |
| Capacity: |
3 tons (2,722 kg) |
| Overall Length: |
7" (178 mm) |
| Weight: |
3 lbs (1.36 kg) |
| Replacement Parts: |
#5247 Nut,
Bolt, Spring & Washer, #9702 Wedge
Heat Treated Steel.
Made in the U.S.A. |
|
| 0440 Twin Claw™ Clamp |
| Self-Tightening.
The Twin Claw™ jaws and drop-forged wedge
distribute the clamping load - reducing the possibility
of metal tearing. Sever duty tooth design for maximum
gripping bite and minimized metal distortion. The
jaw openings allow use around lips of core supports
and aprons, clamps to floor pans and myriad of other
pulls. |
 |
| Gripping Surface: |
4" wide (102 mm) |
| Capacity: |
5 tons (4,536 kg) |
| Overall Length: |
8" (203 mm) |
| Height: |
3" (76 mm) |
| Weight: |
8 lbs (3.63 kg) |
| Replacement Parts: |
#9701 Wedge,
#5255 Nut, Bolt & Washer, #840081 Spring
Heat Treated Steel.
Made in the U.S.A. |
|
| 0450 Flash Clamp™ 5-ton |
| New Mo-Grip™
surfaced jaws provide superior traction when coupled
with pivoting head for uneven surfaces. Spring-loaded
operation means no impacting to tighten. Heat-treated
investment cast jaws provide years of effective
pulling power. Drop-forged wedge. Jaws can be easily
replaced. |
 |
Capacity: |
5 tons (4,536 kg) |
| Overall Length: |
8" (203 mm) |
| Width: |
2" (50.7 mm) |
| Weight: |
3 lbs (1.36 kg) |
| Replacement Parts: |
#010453 Pivot
Jaw, #010702 Small Round Wedge, #520039 Pivot Pins,
#520033 Retaining Bolt, #840076 Spring
Heat Treated Steel.
Made in the U.S.A. |
|
| 0451 Flash Clamp™ 3-ton |
| Spring-loaded
operation makes each clamp easy to use. Mo-Grip
surface and pivoting head allows for a secure grip
on almost any surface. Heat-treated investment cast
jaws provide years of effective pulling power. Drop-forged
wedge. Jaws can be easily replaced. |
 |
| Capacity: |
3 tons (2,722 kg) |
| Overall Length: |
8" (203 mm) |
| Width: |
1½" (38 mm) |
| Weight: |
2.8 lbs (1.27 kg) |
| Replacement Parts: |
#045103 Pivot
Jaw, #010704 Wedge, #520038 Pivot Pins, #520031
Retaining Bolt, #840076 Spring
Heat Treated Steel.
Made in the U.S.A. |
|
| 0452 Flash Clamp™7-ton |
| Spring-loaded
operation makes each clamp easy to use. Mo-Grip
surface and pivoting head allows for a secure grip
on most surfaces. Heat-treated investment cast jaws
provide years of effective pulling power. Drop-forged
wedge. Jaws can be easily replaced. |
 |
| Capacity: |
7 tons (6,350 kg) |
| Overall Length: |
8" (203 mm) |
| Width: |
3½" (89 mm) |
| Weight: |
4.5 lbs (2 kg) |
| Replacement Parts: |
#045203 Pivot
Jaw, #010706 Wedge, #520029 Pivot Pins, #520033
Retaining Bolt, #840076 Spring
Heat Treated Steel.
Made in the U.S.A. |
|
| 0480 135-Degree Swivel Clamp |
New generation
of Mo-Clamps. Self-tightening. Provides multi-angle
pulling from a single clamp. This clamp allows the
drop-forged round wedge to move within the clamp's
channel to provide the exact angle of pull needed
- while allowing it to pivot to avoid twists in
the chain.
|
 |
| Gripping Surface: |
2" wide (51 mm) |
| Capacity: |
5 tons (4,536 kg) |
| Overall Length: |
5" (127 mm) |
| Weight: |
5.7 lbs (2.6 kg) |
| Replacement Parts: |
#010703 Large
Round Wedge, #5256 Nut, Bolt & Washer
Heat Treated Steel.
Made in the U.S.A. |
|
| 0550 T.O. (Tight Opening) Clamp |
| Mo-Clamp's
new design Tight Opening Clamp has all the same
gripping dimension requirements as the old design.
Redesigned and strengthened with our totally new
screw drive mechanism. Still a full 3 ton capacity.
Still able to reach core support and upper sheet
metal areas where no other can. Perfect for small
pick-up frame rails. |
 |
| Gripping Surface: |
1½" wide (38 mm)
½" deep (13 mm) |
| Capacity: |
3 tons (2,722 kg) |
| Overall Length: |
6½" (165 mm) |
| Weight: |
3 lbs (1.36 kg) |
| |
Heat Treated
Steel.
Made in the U.S.A. |
|
| 0551 T.O. (Tight Opening) Clamp |
| Mo-Clamp's
re-introduced the Tight Opening Clamp because popular
demands had to be met so the old design is back.
Still a full 3 ton capacity. Still able to reach
core support and upper sheet metal areas where no
other can. Perfect for small pick-up frame rails. |
 |
| Gripping Surface: |
1½" wide (38 mm)
½" deep (13 mm) |
| Capacity: |
3 tons (2,722 kg) |
| Overall Length: |
6½" (165 mm) |
| Weight: |
3 lbs (1.36 kg) |
| |
Heat Treated
Steel.
Made in the U.S.A. |
|
| 0600 Unibody® Clamp |
| Designed as
a tie-down for unitized bodies with no pinch welds,
and/or pulling floor pans. Staggered case-hardened
pin teeth allow full non-slip gripping in any plate
location as plates need not be squarely lined up
with one another. |
 |
| Gripping Surface: |
4" wide (102 mm)
6" deep (152 mm) |
| Capacity: |
5 tons (4,536 kg) |
| Overall Length: |
9¼" (235 mm) |
| Weight: |
11 lbs (4.99 kg) |
| Replacement Parts: |
#5121 Nut
& Bolt, #9920 Nails & Plugs (20 each)
Heat Treated Steel.
Made in the U.S.A. |
|
| 0650 Box® Clamp |
| A must for
pulling on box rails with welded-on bumper flanges.
Reaches around protruding metal to get a grip on
hard-to-reach surfaces. Its heat-treated jaws grip
a substaintial area for pulls from several directions
and angles. Gator tooth design. |
 |
| Gripping Surface: |
2" wide (50 mm)
2" deep (50 mm) |
| Capacity: |
4 tons (3,629 kg) |
| Overall Length: |
10" (254 mm) |
| Weight: |
10 lbs (4.54 kg) |
| Replacement Parts: |
#5330 Nut,
Bolt & Washer
Heat Treated Steel.
Made in the U.S.A. |
|
| 0655 Dyna-Mo Box™ Clamp |
| These heat-treated
jaws reach around flanges and other obstructions
to get a grip on hard-to-reach surfaces. Severe
duty tooth design for aggressive pulling power.
|
 |
| Gripping Surface: |
1¼" wide (32 mm)
½" deep (10 mm) |
| Capacity: |
3 tons (2,722 kg) |
| Overall Length: |
8" (201 mm) |
| Weight: |
4 lbs (1.81 kg) |
| Replacement Parts: |
#9702 Wedge,
#5254 Nut, Bolt, Spring & Washer
Heat Treated Steel.
Made in the U.S.A. |
|
| 0660 Long Nose ™ Clamp |
| Similar to
the popular #0300 Jr® Clamp, the Long Nose is
self-tightening and includes the original wedge.
Cross-hatch tooth design, spring loaded for easy
opening, deeper reach for hard-to- get-to areas.
|
 |
| Gripping Surface: |
1¾" wide (45 mm)
1" deep (25 mm) |
| Capacity: |
5 tons (4,536 kg) |
| Overall Length: |
9½" (241 mm) |
| Weight: |
6 lbs (2.72 kg) |
| Replacement Parts: |
#9701 Wedge,
#5251 Nut, Bolt, Spring & Washer
Heat Treated Steel.
Made in the U.S.A. |
|
| 0670 Baby Box™ Clamp |
| Self-tightening.
Great for single-lip flanges and inside frame horns.
Original wedge; cross- hatch tooth design; spring-loaded
for easy opening. Throat clearance of 1½"
high (38 mm), 1¼" deep (32 mm). |
 |
| Gripping Surface: |
1¾" wide (45 mm)
1" deep (25 mm) |
| Capacity: |
5 tons (4,536 kg) |
| Overall Length: |
9½" (241 mm) |
| Weight: |
7 lbs (3.18 kg) |
| Replacement Parts: |
#9701 Wedge,
#5252 Nut, Bolt, Spring & Washer
Heat Treated Steel.
Made in the U.S.A. |
|
| 1340 Bolt Puller™ |
Made for those
difficult to get at suspension and frame bolts that
need the area they screw into realigned or straightened.
Use this for up to a 2.5 ton pull and be certain
you are dead center over the bolt area. Uses the
oem bolt to pull against the threads with.
Just loosen the bolt enough to get the tool cradle
under the head and retighten a few turns to assure
no thread loss and pull away. |
 |
|
| 1450 Numerous Angle Puller™ |
| The NAP allows
pulls from any angle. Just put the bolt through
a 1/2 " hole and pull. Use with #2100 or #2400
Multi-Adapter Plates, or with back-up plates. Designed
for use with 3/8" chain. |
 |
| Capacity: |
4 tons (3,629 kg) |
| Overall Length: |
6" (152 mm) |
| Weight: |
2 lbs (.91 kg) |
| Replacement Parts: |
#5245 Nut,
Bolt, & Washer
Heat Treated Steel.
Made in the U.S.A. |
|
| 1500 Pull Ring™ |
| The Pull Ring
for the #2100 2MA Adapter Plate for unlimited body
and frame pulls, such as frame horns, brackets,
cowls, etc. Has recessed pockets to hold bolts stationary
for easy, one-handed tightening. |
 |
| Capacity: |
5 tons (4,536 kg) |
| Overall Length: |
4½" (114 mm) |
| Weight: |
2 lbs (.91 kg) |
| Replacement Parts: |
#5350 Nut
& Bolt
Heat Treated Steel.
Made in the U.S.A. |
|
| 1600 Multi-Purpose Anchor Hook™ |
| A valuable,
small hook device for use on both conventional frames
and unitized bodies. The different ends are used
for a variety of pulls and anchoring. The bottom
foot can be used with both Mo-Clamp #2100 and #2400
Multi-Use Adapter Plates for strut alignment corrections.
|
 |
| Capacity: |
4 tons (3,629 kg) |
| Overall Length: |
7½" (191 mm) |
| Weight: |
2 lbs (.91 kg) |
| |
Heat Treated
Steel.
Made in the U.S.A. |
|
| 1650 Double Eye Chain Hook™ |
| A handy chain
hook-up pulling plate for making double pulls. The
special design allows for both wide or narrow pulls.
Double pulls, using multiple self-tightening clamps,
can be made from the same pulling tower or pulling
post. Features Mo-Clamp easy chain hook-up system.
Designed for use with 3/8" chain. |
 |
| Capacity: |
5 tons (4,536 kg) |
| Overall Length: |
6½" (165 mm) |
| Weight: |
3 lbs (1.36 kg) |
| |
Heat Treated
Steel.
Made in the U.S.A. |
|
| 1700 Chain Locking Fork™ |
| Handy stopper
for chain. Used to maintain chain tension while
adjusting for pulls. Locks chain tight. Heat-treated
alloy steel. Designed for use with 3/8" chain.
|
 |
| Capacity: |
6 tons (5,443 kg) |
| Overall Length: |
6" (152 mm) |
| Weight: |
2 lbs (.91 kg) |
| |
Heat Treated
Steel.
Made in the U.S.A. |
|
| 1800 Track Hook™ |
Quick tie-down
for track systems or back anchoring on frame racks.
Lip can be used for pulling damaged areas; varied
multiple uses for chain lengthening or shortening.
Slot can be used for chain hook-up. Designed for
use with 3/8" chain.
|
 |
| Gripping Surface: |
3" wide (76 mm) |
| Capacity: |
6 tons (5,443 kg) |
| Overall Length: |
6" (152 mm) |
| Weight: |
2 lbs (.91 kg) |
| |
Heat Treated
Steel.
Made in the U.S.A. |
|
| 1850 Inline Slider™ |
New generation
of Mo-Clamps. Self-tightening. Made of heat- treated
Tru-Tuff© steel alloy. Grabs on to flanges
and provides a sure grip while pulling "in-line".
Finger grips are cast into the tool to provide easy
handling while positioning the clamp.
|
 |
| Gripping Surface: |
3" (76 mm) |
| Capacity: |
5 tons (4,536 kg) |
| Overall Length: |
7" (178 mm) |
| Weight: |
3.4 lbs (1.54 kg) |
| Replacement Parts: |
#185005
Jaw "A", #185006 Jaw "B"
Heat Treated Steel.
Made in the U.S.A. |
|
| 1900 Quick Hook™ |
Four hole-size
selection for quick hook-ups in existing frame holes
for pulling of damaged frames. Uses Mo-Clamp's easy
chain hook-up system. Hole sizes: 1 7/8" (48
mm), 1 5/8" (41 mm), 1" (25 mm), 7/8"
(22 mm).
|
 |
| Capacity: |
4 tons (3,629 kg) |
| Overall Length: |
6½" (165 mm) |
| Weight: |
3 lbs (1.36 kg) |
| |
Heat Treated
Steel.
Made in the U.S.A. |
|
| 6314 M-Hook™ w/Chain |
Ever get really frustrated with the conventional Ford-T style hooks and then grab the GM-R style hooks and they don't work either?
Well, here's the newest in that family of holding devices. The M-Hook™ with chain will most likely do the job when the others quit.
This was developed by a bodyman who made them up for his friends and they all swore by it. We tested them and received very positive results.
OK, so you might find a hole it doesn't fit once in a while, but not very often, of that we are certain. |
 |
|
| 6319 Jumbo Nylon Sling™ |
Biggest one
we make. Designed for lower/ upper suspensions,
door pillars and about anywhere you need a pull
that conforms to odd shaped vehicle parts.
|
 |
| Overall Length: |
60" (762mm) |
| Width: |
2 " (25mm) |
| |
Made in the U.S.A. |
|
| 6330 Jumbo Sling™ protective cover |
That Fantastic giant sling does so many things well it is a shame you need to protect it, but it is only nylon and will abrade unless cared for.
This simple cover will add years of use to it. Sharp metal edges become VERY sharp when tonnage is being applied.
This will be an opportunity to afford yourself some insurance that the sling will be there for a few more years to come.
|
 |
| |
Made in the U.S.A. |
|
| 7055 Cone™ upgrade for trams |
These retro-fit all Mo-Clamp trams. Guarantee you are centered in a hole or centered over a rivet or bolt head.
Made of tough Delrin Plastic. Designed to fit all Mo-Clamp trams including baby tram and #7000. Allows centering of holes for easier 1-man tramming on underside of vehicles and engine compartments. Will make sure you are centered on those holes for precise measurements. |
 |
| Size: |
2" Cubed |
| Weight: |
2 oz. |
| |
Made in the U.S.A. |
|
| 7056 Socket Set of (4)™ upgrade for trams |
Made of spun
aluminum. Designed to fit all Mo-Clamp trams including
baby tram and #7000. Allows centering on bolts and
frame rivets for easier 1-man tramming on underside
of vehicles and engine compartments. Will make sure
you are centered on those points for precise measurements.
|
 |
| Size: |
Small handful |
| Weight: |
4 oz. |
| |
Made in the U.S.A. |
|
