|
 |
|
|
| CJJ Frame Machines |
| The Signature |
The Signature is an automotive frame machine that comes in three-, four- or five-tower
configurations.
CJJ, Inc., is a longtime manufacturer of frame equipment that makes and sells the Signature frame rack.
Made in the U.S.A.
The Signature's 10,000-pound lift capacity is supported by both the ram's steel construction and the
lifting power of dual hydraulic rams.A hand-held unit on 25 feet of cord controls the Signature’s centralized hydraulic system.
|
 |
| Specifications: |
- Length of bed top: 20 ft.
- Length w/towers extended: (5 tower machine)
24 ft. 3 in.
- Width of bed: 88 in.
- Width w/towers extended: 14 ft. 4 in.
- Width of treadway: 28 in.
- 12,000 lb. lift capacity.
- Weight: 5 tower 8,100 lbs., 4 tower 7,650 lbs., 3 tower 7,050 lbs.
- Width between treadways: 32 in.
- Overall height: 9 ft. 3 in.
- Working height: 31 in.
- Hydraulics: (5 tower machine) 10 & 5 ton
- Power required: 120v, 20 amp, dedicated
service
|
|
|
|
| Signature
Hybrid |
Our Signature Hybrid Frame Machines were created with versatility and power at top of mind.
They have 3 pivoting pulling towers at one end of the bed and 2 (or 3) movable towers that ride on a track around the other end.
The
pivoting towers provide strength, stability and repair width while the movable towers make 360-degree pulling access possible.
This combination gives auto body technicians 10-ton hydraulics at each tower plus 360-degree pulling access to the vehicle frame.
That makes the Hybrid a great frame rack with less "dead zones". The towers glide into position with smooth, one-handed motion
around the track making tower group pulls easier than ever. |
 |
| Features: |
- 10-ton hydraulics in all towers provides the pulling power.
- Movable towers make group pulls possible.
- 360-degree access, less dead zones.
- Comes with 2 or 3 movable towers, your choice.
- V-rollers allow smooth, one-handed positioning of towers along track.
- Easy tie-down system secures track towers for pulling.
- Removable cross members allow access to front and rear of vehicle.
- Ability to group towers at drive-on end.
- Hydraulic quick connections on frame rack bed, 2 per side.
- Two-year limited warranty.
- Signature Hybrid frame machines are made in the USA.
|
|
| Specifications: |
- Length of bed top: 20 ft.
- Length w/towers extended: 24 ft. 6 in.
- Width of bed: 88 in.
- Width w/towers extended: Pivot end 13 ft. 4 in. Track end 11 ft. 4 in.
- Width of treadway: 28 in.
- Width between treadways: 32 in.
- Working height: 31 in.
- Hydraulics: 10 ton
- Power required: 120v, 20 amp, dedicated service
|
|
|
|
| Signature Xpress |
| Lift, Inspect, and Pull
|
 |
| Specifications: |
- Length of bed top: 9 ft. 8 in.
- Width of bed: 35 in.
- Highest bed height: 62 in.
- Lowest bed height: 4.25 in.
- Hydraulics: 5 ton
- Lifting capacity: 5600 lbs
- Pulling radius: 360 degrees
- Air required: 100 psi
- Power required: 110v, 16 amp
|
|
|
|
| American Freedom |
| The American Freedom is available in two lengths to meet you needs, a 20 foot model or the longer 22 foot model
|
 |
Specifications:
(20 ft. 3 tower) |
- Length of bed top: 20 ft.
- Length w/towers extended:
24 ft. 11 in.
- Width of bed: 88 in.
- Width w/towers extended: 11 ft. 4 in.
- Width of treadway: 26.5 in.
- Width between treadways: 32 in.
- Overall height: 9 ft. 11 in.
- Working height: 12 in. up to 42 in.
- Hydraulics: 10 ton, all electric over hyd.
or all air over hyd.
- Power required: 120v, 20 amp, dedicated
service
- Optional tower configurations: 2, 3, or 4
towers
- Tie downs: 222
|
|
|
|
| American Freedom GT |
Features of the American Freedom GT include; a 92 inch wide platform, working heights as low as
12 inches and as high as 42 inches in addition to a 12,000 pound lift capacity.
Allowing auto body shops to increase their productivity,
by accepting heavier and wider vehicles, is the number one benefit of this new machine. |
 |
| Specifications: |
- Length of bed top: 22 ft.
- Length w/towers extended: 26 ft. 11 in.
- Width of bed: 92 in.
- Width w/towers extended: Pivot end 12 ft. 6
in.
- Width of treadway: 28.5 in.
- Width between treadways: 35.5 in.
- Overall height: 9 ft. 11 in.
- Loading height: 12 in.
- Working height: 12 in. up to 42 in.
- Hydraulics: 10 ton, electirc over Hydraulic
or air over Hydraulic
- Power required: 120v, 20 amp, dedicated service
- Optional tower confirgurations: 2, 3, or 4
towers
- Tie downs: 222
- Lift capacity: 12,000 lbs.
|
|
|
|
|
|
|
| |
www.straight-square.com |
| |
©2012 Straight and Square Dist. LLC |
Chief, Chief Automotive, Chief Automotive Systems, Chief Automotive Technologies, MoClamp, DJS, OTC, GFS, Global Finishing Systems, P-F, Porter Ferguson, Pro Spot, Robinair, TIF, Steck, Chassis Liner,
FAST Anchoring, S21, S21M, Impulse, VHT, Titan, Titan 360, Vector, Velocity, Velocity Max, Kahuna, Goliath, Stingray, Welder, Elimident, Dent Puller, Frame, Frame Rack, Frame Straightening,
Clamps, Clamping, Anchoring, Mo-Grip, Tram Guage, Dyna-Mo, Dyna-Mo JR, Universal Dolley System, Paint Booth, Mixing Room, Prep Station, Waterborne, Powder Coat, Filters,
Airbag, Tire Pressure, Porta Powers, Ram, Hydraulics, Frame Repair, Auto Body Repair, Auto Body, i4, Inverter, Spot Welder, Mig, Aluminum Welding, Lift N Rak,
Minnesota, Minneapolis, St Paul, Mankato, Willmar, St Cloud, St Joseph, Hinckley, Fergus Falls, Marshall, Duluth, Brainerd, Alexandria, Moorhead, East Grand Forks, Bemidji, Albert Lea, Grand Rapids, Hibbing, Ely, International Falls, Pipestone, Red Wing, Owatonna, Redwood Falls,
North dakota, Fargo, Grand Forks, Bismarck, Jamestown, Dickinson, Minot, Devils Lake, Whapeton,
Wisconson, Eau Claire ,Wausau, Superior, Hayward, Rice Lake, Stevens Point, Wisconson Rapids, Marshall, Rhinelander, Hudson, Menomonee, Ashland
|